EMF Protective Shielding Window Films

->->

▌ Protection against high-frequency wireless installations such as: mobile phone antennas (for 2G, 3G, 4G and 5G technologies), Wi-Fi's, DECT cordless phones, radars,... etc.

▌ For installation in glass windows and balconies.

▌ Indicated for its application in home, and in the workplaces.

▌ The attenuation depends on each foil model: RDF62 * 18 dB, RDF72 * 33 dB and RDF25 * 35 dB.

▌ We recommend its use, in general, for low radiation levels (< 1000 uW/m2).

▌For indoor use: RDF62, RDF72 and RDF25; and outdoor use: RDF25.

▌ The shielding foils darken the glass, depending on the model there is a certain light transmission: RDF62 * 62%, RDF72 * 72% and RDF25 * 25%.

» The RDF62, RDF72 and RDF25 (interior) models are not suitable for glass with thermal/sun protection or thermal emitters!

EMF Shielding Foils Installation

1. Clean the glass with a cloth or paper that does not leave residues.
2. Dilute FMK30 concentrate to 0.5 L. of water.
3. Spray the solution on the glass and on the shielding foil.
4. Apply the foil on the glass. And slowly peel it off.
5. With the FVR10 paddle, and from the center to the edges of the sheet, remove the liquid between the glass and the sheet to avoid the appearance of bubbles.
6. Seal the edges with FL4 sealing glue.