EMF Shielding Mesh Yshield V4A03

• EMF shielding stainless steel mesh to apply as flyscreen or on the walls.
• EMF Screening: 55 dB @ 1GHz.​

• Extremely fine woven, noncorrosive stainless-steel gauze .
• Protection against high-frequency radiation (HF) and low-frequency electric fields (LF).
• Typical application due to the thin filaments especially as flyscreen.
• In comparision to V4A10, due to the smaller mesh width, the shielding attenuation is better at high frequencies.
• Further application in roof areas, at drywall constructions, loosely laid, etc.
• Groundable (LF-E).
• Ready for 5G!!

Technical Data

• Width: 90 cm.
• Length: 25 m roll / by the meter.
• EMF Shielding: 55 dB @ 1GHz.
  
• Mesh width: 0.3 mm
• Wire diameter: 0.08 mm
• Material thickness: 0.16 mm
• Open area: 62 %
• Weight: 200 g/m².
• Color: Silver.
• Fire-proof material, A1 according DIN 4102:1994.
• Surface conductivity: 0.03 Ohm (square resistance)

Processing

• In case processing as flyscreen, the application is identical to that of a regular flyscreen in commercial tenter frames.
• In case processing under plaster you should work with a finest organic filler.
• Under the floor covering (laminate, parquet, PVC coating, etc.) is being fixed with adhesive.
• For drywall construction and in roof area the mesh elements can be bolt or stapled together.
• The rule is: always overlapp the single elements at least 5 cm.
• For grounding use the perforated stainless steel tape ELB by screwing it right across the elements into the surface.

We recommend you to be sure QUANTITY and TYPE of material carefully before ordering !!! Not be performed RETURNS on products CUTTED to size or MANUFACTURED on demand, only against defects of manufacture!!