• +34 960 913 911
  • +34 615 067 776
  • cem@teleingenieria.es
  • Free Shipping 50€ Spain
  • Coupon -3 % : February23
  • +34 960 913 911
  • +34 615 067 776
  • cem@teleingenieria.es
  • Free Shipping 50€ Spain
  • Coupon -3 % : February23

EMF Shielding Protective Wallpaper Yshield ECO-P60 width 70 cm

10.37 €

10.07 €

(1 m² = 14.39 €)
incl. VAT, plus delivery
Product data sheet
Delivery time: 7-10 day(s)


  • Shielding ECO-Friendly wallpaper against HF EMF and LF E field.
  • ECO-P60 is a one-sided metallized wallpaper for shielding high frequency (HF) radiation and low frequency (LF) electric fields.
  • Ready for 5G !!
  • Our professional product for walls, ceilings and floors.
  • Very high dimensional stability during and after processing.
  • Product is highly vapor diffusible.
  • With no chemicals or auxiliary materials, the eco-friendly approach is sky high.
  • Only suitable for indoor application.
  • Wallpapers tested and certified by TÜV-SÜD.


  • Base: The base must be clean, dry and free of layers affected by moisture. Absorbent surfaces must be primed with our GK5 primer.
  • Application mode with the metallic side visible: the result is not so visually attractive. But afterwards, all sheets can be easily connected with GSX10 grounding tape and then grounded.
  • Application method with the white side of the wallpaper visible: Visually the best solution, but the GSX10 grounding tape should be applied to the base wall.
  • Glue: For heavy wallpapers.
  • Overlapping the sheets: to achieve the best protection result, the ideal is to glue the individual overlapping strips (3 cm approx.). The overlap can be broadly smoothed with a fine putty and then sanded.
  • Alternatively you can also glue edge to edge, as is usually done with wallpapers, but the GSX10 grounding tape should be applied to the base wall (in the edge).
  • Work carefully and wear protective gloves!

Technical Data

  • Width: 70 cm.
  • Length: x linear meter.
  • Attenuation: 60 dB @ 1GHz
  • Surface conductivity: 0.02 ohm (square resistance)
  • Weight: 190g/m².
  • Material thickness: 0.24mm.
  • Colour: White / Silver.
  • Tensile Strength: 4400 (transversal) - 6800 (longitudinal) N/m
  • Materials: Zink, cellulosic pulp, polyester fibers.


  • Suitable for grounding and shielding the low-frequency electric field (E) (Grounding Kit: GP1 plug + GL20 cable + GS3 plate + GSX10 tape).
  • This product has an electrically conductive surface must be integrated into the functional equipotential bonding (FEB).

We recommend that the grounded installation be performed and checked by a professional electrician. The electrical installation must be provided with a 30 mA "differential switch" (check the electrical panel). Our company is not responsible for possible damages derived from and/or caused by an incorrect installation and/or connection of grounding. Qualified personnel carrying out the connection work will be responsible for the measures carried out.

This is a cut-to-size or made-to-order item. We recommend that customers MAKE SURE THE QUANTITY AND TYPE OF MATERIAL carefully before ordering!! No returns are made on this products, only against manufacturing defects !!!