LF Electric Field Shielded Cable 3 x 0.75 MM.

| Shielded, very flexible cable for non-fixed electrical devices for the protection against low-frequency electric field (LF-E).

| To reduce the magnetic field, the conductors are twisted 15 times per meter!

| Indicated for portable electrical devices (not fixed installations!!) as lamps, computers, printers, TV, ...etc

​Technical Data

• Wires, section: 3 x 0,75 mm2.
• Shielding: Metallic sheet with grounding wire.
• Current load according to IEC 320-1: 16 A.
• Nominal voltage: 250 V / 50 Hz.
• Outer diameter: 6.6 mm.
• Outer cover: PVC.
• Protection class 1 (with ground wire).

Recommendations

• Connect the ground wiring of the junction box with the ground wiring of the cable during installation!
• Always connect green-yellow with green-yellow, in no case connect it with the continuity wire!
• Protect the bare continuity wire and the foil with insulating tube.
• There must not be any conductive components in the junction box!
• Connect the shield connector = continuity wire ONLY on one side to the earth circuit connector.
• Do not use shielded and unshielded cables at the same time.

​