EMF Shielding Protective Wallpaper Yshield ECO-P100 width 90 cm
Description
- Shielding ECO-FRIENDLY wallpaper against HF EMF and LF E field.
- ECO-P100 is a one-sided metallized wallpaper for shielding high frequency (HF) radiation and low frequency (LF) electric fields.
- Ready for 5G !!
- Our professional product for walls and ceilings.
- Very high dimensional stability during and after processing.
- Product is highly vapor diffusible.
- With no chemicals or auxiliary materials, the eco-friendly approach is sky high.
- Only suitable for interior application as intermediate wallpaper on walls and ceilings.
Installation
Only suitable for interior application as an intermediate material on walls and ceilings. Applicable for laying it loosely only if the wallpaper is protected against mechanical damage.
- Base: The base must be clean, dry and free of layers affected by moisture. Absorbent surfaces must be primed with our GK5 primer.
- Application mode with the metallic side visible: the result is not so visually attractive. But afterwards, all sheets can be easily connected with GSX10 grounding tape and then grounded.
- Application method with the white side of the wallpaper visible: Visually the best solution, but the GSX10 grounding tape should be applied to the base wall.
- Glue: For heavy wallpapers.
- Overlapping the sheets: to achieve the best protection result, the ideal is to glue the individual overlapping strips (3 cm approx.). The overlap can be broadly smoothed with a fine putty and then sanded.
- Alternatively you can also glue edge to edge, as is usually done with wallpapers, but the GSX10 grounding tape should be applied to the base wall (in the edge).
- Work carefully and wear protective gloves!
Technical Data
- Width: 90 cm.
- Length: x linear meter.
- Attenuation: 100 dB @ 1GHz
- Surface conductivity: 0.02 ohm (square resistance)
- Weight: 360 g/m².
- Material thickness: 0.28 mm.
- Colour: White / Silver.
- Tensile Strength: 4400 (transversal) - 6800 (longitudinal) N/m
- Materials: Zink, cellulosic pulp, polyester fibers.
Grounding
- Suitable for grounding and shielding the low-frequency electric field (E) (Grounding Kit: GP1 plug + GL20 cable + GS3 plate + GSX10 tape).
- This product has an electrically conductive surface must be integrated into the functional equipotential bonding (FEB).
We recommend that the grounded installation be performed and checked by a professional electrician. The electrical installation must be provided with a 30 mA "differential switch" (check the electrical panel). Our company is not responsible for possible damages derived from and/or caused by an incorrect installation and/or connection of grounding. Qualified personnel carrying out the connection work will be responsible for the measures carried out.
This is a cut-to-size or made-to-order item. We recommend that customers MAKE SURE THE QUANTITY AND TYPE OF MATERIAL carefully before ordering!! No returns are made on this products, only against manufacturing defects !!!