EMF Shielding Paint Yshield DRY54 Powder 1L

Special paint with great all-round characteristics – delivered as a powder: "ALL-ROUND CHARACTERISTICS & BEST PRICE".

Breathable, solvent-free, plasticizer-free and low-emission.

With phenomenal physical and chemical properties, along with high ecology.

As shielding paint for rooms and buildings.

Recommended for indoor and outdoor use.

Mixing with water

• The powder must be mixed with water, for this it is recommended to have: a digital scale, a mask, protective glasses, AR42 paint stirrer, a mixing bucket, a drill.
• Mix with water and let stand 15 min. After this time it is beaten again.
• Two TYPES OF MIXTURES can be made:
  • 1) For an approximate surface area of ​​4 m2 / liter * Less water is required (0.4-0.5 liter approx.) * The surface area is reduced * The shielding is increased by 6 dB.
  • 2) For an approximate surface of 8 m2 / liter * More water is required (0.9 - 1 liter approx) * The surface is doubled * The shield is maintained.

GENERAL ADVANTAGES OF POWDER PAINT

• As it does not carry water, it gives it a very long useful life.
• No preservatives needed.
• Reduced risk of frost damage.
• 50-80% reduction of plastic waste.
• Up to 60% less shipping costs.
• More security in shipping in case of damage to the packaging.
• If necessary, small amounts can be removed for repair work.

Screening attenuation for 4 m2/liter:

At 1 GHz: Single layer 36 dB | Double layer 41 dB | Three layer 46 dB

Screening attenuation for 8 m2/liter:

At 40 GHz: Single layer 30 dB | Double layer 36 dB | Three layer 40 dB

Underground

Adhesion on almost all substrates interior and exterior.

Top coating

Preferably covered with plastic bonded water-based emulsion paints, dispersion silicate paints, facade paints or silicon resin paints.

Grounding

Must be grounded! We recommend interior the grounding strap GSX plus grounding plate GS /GF. Exterior the fiber additive AF3 plus the grounding plate GF4.

Optional: Fiber additive AF3

For crack bridging and a better grounding we advise our fiber additive AF3 with long conductive carbon fibers.

Frost resistance

This product is frost resistant (proved for 5 frost-/thaw cycles) and can be shipped throughout the year by air cargo or ship.

Ingredients

Water, natural graphite, pure acrylics dispersion, carbon black, additives, preservative (BIT, INN, MIT).

Technical data

Please find detailled data in the table overview and the technical data sheet.

Ready for 5G!!

Including both 5G frequency spectrums: FR1 (600 MHz - 6 GHz) and FR2 (24 GHz - 40 GHz).

Safety up to 40 GHz

You receive measuring curves and laboratory reports up to 40 GHz with each of our shielding products, by which we bindingly guarantee the shielding effectiveness.

Shipping

• Weight: 0.6 Kg (1L) * 3 Kg (5L).
• Formats: 1liter (1L) ó 5 liter (5L).
• Dimmensions: 300 x 200 x 30 cm. (1L) * 400 x 400 x 60cm. (5L)