Earth and Continuity Tester ECT-50 (C-OHM)

• ECT-50 Grounding for measuring, simply, the quality of the grounding simply, indicated for emf screening solutions.

• The ECT-50 Grounding Tester is a handheld kit.
• Its robust and ergonomic construction allows the user to work comfortably with the ground tester.
• It allows to quickly detect the earth resistance. Additionally you can check if the masses are connected to each other.
• To ensure a good reading, the ground tester has a large easy-to-read multi-color LCD display.
• The screen also visually informs about the status of the installation:
  • If the installation is in order, the screen remains blue.
  • In the event of a faulty installation the ground tester display will change the background color to red.
• The ground tester is made up of a reading unit that can be inserted into a socket, and a safety tip that is connected at the bottom of the reading unit. The safety tip has a cable with a length of about 7 m.
• Main features:
  • Two-color LCD display, backlit
  • Installation category III
  • Service voltage: 230 V AC
  • High accuracy
  • Ergonomic design
  • Protection IP40, IK06
• To obtain optimal results in low frequency screening, it is essential to have a good earth connection.
• We recommend that all shielding materials directly attached to the wall or close to electrical consumers be connected to a good earth ground.
• The optimal electrical resistance of a ground connection to comply with the SBM / IBN recommendations is 6 Ohm, if possible less than 2 Ohm.
• It should not replace a professional check. It should be seen as a diagnostic supplement.

Technical Data

• Range: 0 ... 2000 Ω.
• Display: Two-color, backlit LCD.
• Accuracy: ± (3% + 3 digits) with 0 ... 200 Ω at 23 °C ± 5 °C.
• Service voltage: 230 V (Ph / N) -10 / +6%.
• Operating frequency: 50/60 Hz.
• Standards: IEC 611010-1 EN 61557-4, Klasse II, IP40, IK06.
• Installation category: III
• Operating temperature: -15 ... +45 ° C.
• Storage temperature: -25 ... +70 ° C.
• Dimensions: 72 x 210 x 50 mm (B x L x H).
• Test lead length: Approx. 7 m
• Weight: 340 g.

Package Content

• ECT-50 grounding tester.
• Tip with 7 m. of cable.
• Manual.