HIGH PASS FILTER HP800-3G
Description
-
High Pass Filter (600 MHz).
-
For high frequency (HF) devices of Gigahertz-Solutions brand.
-
Low Band Attenuation: 50 dB.
DESCRIPTION
-
Significantly increases measurement accuracy for the antenna LogPer HFE35C and HFE59B devices whose measurement bandwidths nominal are above 800 MHz (standard with HFE59B).
-
Its use is indicated as LogPermanente-systemic antenna is sensitive to lower frequencies. They are attenuated by the filter appropriately, so that the measurements will not be altered by these low frequencies where the antenna LogPer measure.
-
Attenuates low frequencies, getting below 600 MHz, an attenuation of 50 dB (factor = 100,000).
-
Connection between antenna and measuring device.
-
In all other equipment of our company, we include a basic filter similar message on the measuring device.
-
In the case of the HFE include not indicated as we would get altered values.
-
HP800_G3 not measure in combination with the antenna UBB27.
TECHNICAL DATA
-
Attenuated-Accuracy Band: 10 MHz - 600 MHz <-50 dB.
-
Band-Pass Accuracy: 0 Hz, 800 MHz - 3000 MHz = - 1 dB + / - 0.5 dB
-
Isolation:> 12 dB
-
Other: 2 years warranty
-
Weight: 0.03 kg.
Additional product information
- FREQUENCY
- HIGH (HF)
- USE
- PROFESSIONAL