Shielded Installation Cable 3 x 1.5 MM - 100 m.l.
Delivery time: 7-10 day(s)
Description
- Shielded installation cable for the protection against low-frequency electric field (LF-E).
- With improved properties in the event of fire (halogen-free and free of plasticiens).
- Wire count, cross section: 3 x 1,5 mm².
- Length: 100 lm. ( x roll )
- Outer diameter: 9.6 mm.
- Calorific potential: 0.43 kWh/m
- Halogen-free.
- Connection Voltage: 230V / 50 Hz.
- Nominal voltage: 600 / 1000 V .
- Shielding: copper braided mesh.
- Conductor: Class 5 according to EN 60228.
- Cover: Cover: XLPE, fireproof according to normal UNE21123.
- Weight: 150 g/m.
Recommendations
- Connect the ground wiring of the junction box with the ground wiring of the cable during installation!
- Always connect green-yellow with green-yellow, in no case connect it with the continuity wire!
- Protect the bare continuity wire and the foil with insulating tube.
- There must not be any conductive components in the junction box!
- Connect the shield connector = continuity wire ONLY on one side !! to the earth circuit connector.
- Do not use shielded and unshielded cables at the same time.