SHIELDING PAINT DRY65 POWDER FOR 5L

• Shielding high frequency electromagnetic fields, and also  low frequency electric field E, powder for 5L . [35dB @ 1 layer]​​ 

  

CHARACTERISTICS

 

Shielding paint delivered as a powder. Dispersion silicate paint with potassium silicate as binder and under 5 % synthetic content. For the shielding of high-frequency radiation (HF) and low-frequency electric fields (LF).

• Delivered as a powder to mix yourself.

• Half shipping weight.

• Frost resistant on shipping.

• Shelf life for years.

• Breathable, solvent free, low-emission, low odor.

• Attenuation: 35 dB, two-layer 43 dB. The shielding attenuation is regularly tested in our own EMC laboratory. We have measurement setups due to the following standards: ASTM D4935-10, IEEE Std 299-2006, IEEEE Std 1128-1998, ASTM A698/A698M-07.

• Coverage: One-layer 5 - 7.5 qm/l. two-layer 2.5 - 3.75 qm/l.

• Packaging size: 2.7 kg powder for 5 liters of paint.

 

SAFETY INSTRUCTIONS

This product with a pH-value of 12 contains potassium silicate powder. Stirring is only allowed with protective equipment! We urgent recommend our safety-set DRY99, see accessories.

 

USAGE

Preferrably interior. Due to the good moisture resistance even exterior.

 

PREPARATION

Stir the 2.7 kg powder in a bucket with 3.3 liters of water. Preparation time appr. 40 minutes.

 

UNDERGROUND

We recommend a surface preparation with our primer concentrate GK5 or another primer. Excellent adhesion on almost all absorbent undergrounds. Not applicable on gypsum based undergrounds, potassium silcate peels off from gypsum!

 

FINAL COATING

Normally on the graphite surface only organic dispersion paints or dispersion silicate paints adheres well. For pure mineralic coatings we recommend an aftertreatment with our primer concentrate GK5 or another for the coating suitable primer. Don´t use gypsum based coatings, gypsum peels off from silicate coatings!

 

INGREDIENTS

Graphite, potassium silicate powder, carbon black, acrylics powder, additives.

 

GROUNDING

Electrically conductive. Can be contacted and grounded to shield electric fields (LF). Please find corresponding components under "Grounding".

 

TECHNICAL DATA

 

• VOC-content: 0.1 g/l (the EU limit value for category A/a is 30 g/l from 2010). 

• Sd-value: 0.1 m. 

• Ph-value: 12. 

• Adhesive tensile strenght: 4.6 N/mm². 

• Shelf live: 24-48 months. 

• Color: Black.

• More technical details in our table overview.

​